Description
The PROLIGHTS EclPanel TWCJr, is a compact 1×1 LED soft light which provides a beautiful, wide source of soft and precise colours.
In addition to this, the PROLIGHTS EclPanel TWCJr comes with a full range of white reproductions, from daylight through to tungsten tones, reaching a superior light quality with high CRI, TLCI and TM-30.
Features
- 370W RGB + Warm White LED source
- CRI > 94; R9 > 88.8; TLCI > 92
- 4 section pixel control and built-in lighting effects for cinema applications
- Silent operation with multiple fans mode
- Battery connection (4pXLR 24-36V): compatible with industry standard external batteries (optional)
Light Source
- Source: 370W RGB + Warm White
- Luminous flux: 17,109 lm @ 4,000K with LD filter
- Lux: 265 lx @ 5 m full
- CRI: 90 @ 3,200K; 94 @ 5,600K
- R9: 84.1 @ 3,200K; 88.8 @ 5,600K
- TLCI: 92 @ 5,600K
- TM30 Rf: 90 @ 3,200K; 89.4 @5,600K
- TM30 Rg: 105 @ 3,200K; 104 @5,600K
- Source life expectancy: > 50,000 h
Optics
- Beam angle: 102°
- Field angle: 158°
- Lens type: medium density diffusion panel (interchangeable)
- Additional optics: see available accessories
Colour System
- Colour mixing: RGB + Warm White
- CTC: CTC control, + / – green correction, Tungsten emulation
- White presets: 2,800 K – 10,000K with 28 K resolution
- Colour wheel: virtual colour wheel with macros
Dynamic Effects
- Control Resolution: 16bit dimmer, colours
- Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
- Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
Body
- Body: sturdy die-cast aluminium body
- Body colour: black
Control
- Protocols: DMX512, RDM, W-DMX, rotatory knob
- Stand Alone: selectable mode through 3 rotatory knobs
- Pixel control: 4 section control
- W-DMX: included, wireless solution receiver
- RDM: RDM ready for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
Electronics
- Dimmer curves: selectable dimming modes available
- Strobe / shutter: 1 – 30 Hz, electronic
- Display battery: self-charging battery backup
- Operating temperature: -20° ~ +45°
- LED Control: flicker free frequency with adjustable PWM
- Selectable PWM: 600 ~ 40,000 Hz
Electrical
- Mains power supply: 100-240 V – 50/60 Hz
- Low Voltage DC mains: 24-36V
- Max power consumption: 230 W
- Power factor: >0.97
Physical
- Cooling: active, silent operation
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Low Voltage DC connector: XLR 4p
- IP rating: 20
- Dimensions (WxHxD): 529x430x144 mm / (with PO system) 546x430x144 mm
- Weight: 10.5 kg / (with PO system) 11.8 kg
