PROLIGHTS EclCyclorama 100

Request more information

Or call us today on
+81 (0)3-6907-1758

Key features

RGB + Warm White colour systems allows high quality of whites (CRI 93 @3,200K) and bright colours

Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage

Wide Asymmetric beam angle to allow flexible installation at modular distances between fixtures

Description

PROLIGHTS’ EclCyclorama 100 is a soft-edge, linear cyclorama and floodlight, designed in a surprisingly low profile form factor to meet applications at both front and end of the stage, offering an unprecedent level of brightness in its category.

The fixture is equipped with a custom and calibrated RGB + Warm White LED source, which is capable to deliver a linear and high quality white reproduction of the entire spectrum with high CRI, TLCI and TM30 performances.

The optical system has been designed to offer a very wide asymmetric beam angle, and capable of a superior lumen efficiency, making the EclCyclorama range a very flexible solution, suitable for both application where fixture are connected each other or separated by a considerable distance, without worrying of dark-edge or uniformity gaps.

The fixture is extremely user friendly and offers a multitude of control possibilities being DMX, RDM, Artnet and Wireless DMX.

Features

Light Source

Source: 330W RGB + Warm White
Luminous flux: (with 80°x40° filter on board) 27,342lm @full
Lux: @1m to wall and 1.5m height @ full (with standard filter 80°x40°) 1,240 lx – (with 40° filter) 2,610 lx – (with 10°x60° filter) 3,110 lx – (with 30°x60° filter) 2,880lx
CRI: 93 @ 3,200K; 92.6@ 5,600K
R9: 88 @ 3,200K; 93.7@ 5,600K
TLCI: 91 @ 5,600K
TM30 Rf: 89.8 @ 5,600K
TM30 Rg: 106 @ 5,600K
Source life expectancy: > 50,000 h

Optics

Beam angle: (HxV) 80°x40°
Additional optics: see available accessories

Colour System

Colour mixing: RGB + Warm White
CTC: CTC control, + / – green correction, Tungsten emulation
White presets: 2,800 K – 6,500K
Colour wheel: virtual colour wheel with macros

Dynamic Effects

Control Resolution: 16bit Dimmer, Colours
Special features: linear crossfade channel from any white to any colour; virtual CTO on colours

Body

Hardware on-board: sockets for Quick-Lock Omega bracket (clamp not included)
Body: sturdy die-cast aluminium body
Body colour: black
Other: +/- 8° angle adjusting

Control

Protocols: DMX512, RDM, Art-Net, W-DMX
W-DMX: included, wireless solution receiver
RDM: RDM ready for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included

Electronics

Dimmer curves: Selectable dimming modes available
Strobe / shutter: 1 – 30 Hz, electronic
Display battery: self-charging battery backup
Operating temperature: -10° ~ +45°
LED Control: flicker free frequency with adjustable PWM
Selectable PWM: 600 ~ 25,000 Hz

Electrical

Mains power supply: 100-240 V – 50/60 Hz
Max power consumption: 400W
Power factor: >0.94

Physical

Cooling: heat sink without fan
Suspension and fixing: any position with quick-lock omega brackets
Signal connection: Amphenol XLR 5p IN/OUT connectors
Data connection: RJ45 IN/OUT
Power connection: Seetronic powerCON waterproof IN/OUT connectors
IP rating: IP20
Dimensions (WxHxD): 1000x119x148mm / 39.37”x4.69”x5.83”
Weight: 9.6kg / 21.16lbs